minisatip-0.7.4 compiliert auf der DM900
https://github.com/catalinii/minisatip
Code
[20:14 root@dm900] > minisatip -e 0-2 -f -y 5544
[24/08 20:16:04.298 main]: minisatip version 0.7.4, compiled with s2api version: 050A
[24/08 20:16:04.298 main]: Built with dvbcsa
[24/08 20:16:04.298 main]: Built with CI
[24/08 20:16:04.298 main]: Built with dvbapi
[24/08 20:16:04.298 main]: Built with AES (OpenSSL)
[24/08 20:16:04.299 main]: Built with tables processing
[24/08 20:16:04.299 main]: Built with satip client
[24/08 20:16:04.299 main]: Built with linux dvb client
[24/08 20:16:04.299 main]: Built with backtrace
[24/08 20:16:04.299 main]: Built without netceiver
[24/08 20:16:20.446 main]: Initializing with 2 devices
Alles anzeigen
Code
[19:20 root@dm900 dm900] > minisatip --help
minisatip version 0.7.4, compiled with s2api version: 050A
[24/08 19:20:31.411 main]: Built with dvbcsa
[24/08 19:20:31.411 main]: Built with CI
[24/08 19:20:31.412 main]: Built with dvbapi
[24/08 19:20:31.412 main]: Built with AES (OpenSSL)
[24/08 19:20:31.412 main]: Built with tables processing
[24/08 19:20:31.412 main]: Built with satip client
[24/08 19:20:31.412 main]: Built with linux dvb client
[24/08 19:20:31.412 main]: Built with backtrace
[24/08 19:20:31.412 main]: Built without netceiver
./minisatip [-[fgltzE]] [-a x:y:z] [-b X:Y] [-B X] [-H X:Y] [-d A:C-U ] [-D device_id] [-e X-Y,Z] [-i prio]
[-[uj] A1:S1-F1[-PIN]] [-m mac] [-P port][-o oscam_host:dvbapi_port] [-p public_host] [-r remote_rtp_host] [-R document_root] [-s [DELSYS:]host[:port] [-u A1:S1-F1[-PIN]] [-L A1:low-high-switch] [-w http_server[:port]]
[-x http_port] [-X xml_path] [-y rtsp_port]
Help
-------
* -a x:y:z simulate x DVB-S2, y DVB-T2 and z DVB-C adapters on this box (0 means auto-detect)
* eg: -a 1:2:3
- it will report 1 dvb-s2 device, 2 dvb-t2 devices and 3 dvb-c devices
* -b --buffers X:Y : set the app adapter buffer to X Bytes (default: 56400) and set the kernel DVB buffer to Y Bytes (default: 5775360) - both multiple of 188
* eg: -b 18800:18988
* -B X : set the app socket write buffer to X KB.
* eg: -B 10000 - to set the socket buffer to 10MB
* -H --threshold X:Y : set the write time threshold to X (UDP) / Y (TCP) milliseconds.
* eg: -H 5:50 - set thresholds to 5ms (UDP) and 50ms (TCP)
* -d --diseqc ADAPTER1:COMMITTED1-UNCOMMITTED1[,ADAPTER2:COMMITTED2-UNCOMMITTED2[,...]
* The first argument is the adapter number, second is the number of committed packets to send to a Diseqc 1.0 switch, third the number of uncommitted commands to sent to a Diseqc 1.1 switch
The higher number between the committed and uncommitted will be sent first.
* eg: -d 0:1-0 (which is the default for each adapter).
- note: * as adapter means apply to all adapters
- note: * before committed number enables fast-switch (only voltage/tone)
* -q --diseqc-timing ADAPTER1:BEFORE_CMD1-AFTER_CMD1-AFTER_REPEATED_CMD1-AFTER_SWITCH1-AFTER_BURST1-AFTER_TONE1[,...]
* All timing values are in ms, default adapter values are: 15-54-15-15-15-0
- note: * as adapter means apply to all adapters
* -D --device-id DVC_ID: specify the device id (in case there are multiple SAT>IP servers in the network)
* eg: -D 4
* -E Allow encrypted stream to be sent to the client even if the decrypting was unsuccessfull
* -Y --delsys ADAPTER1:DELIVERY_SYSTEM1[,ADAPTER2:DELIVERY_SYSTEM2[,..]] - specify the delivery system of the adapters
* eg: --delsys 1:dvbt,2:dvbs
- specifies adapter 1 as a DVBT device, adapter 2 as DVB-S, which overrides the system detection of the adapter
* --dmx-source ADAPTER1:FRONTENDX - specifies the frontend number specified as argument for DMX_SET_SOURCE
* eg: --dmx-source 0:1 - enables DMX_SET_SOURCE ioctl call with parameter 1 for adapter 0
* -e --enable-adapters list_of_enabled adapters: enable only specified adapters
* eg: -e 0-2,5,7 (no spaces between parameters)
- keep in mind that the first adapters are the local ones starting with 0 after that are the satip adapters
if you have 3 local dvb cards 0-2 will be the local adapters, 3,4, ... will be the satip servers specified with argument -s
* -f foreground, otherwise run in background
* -g use syslog instead stdout for logging, multiple -g - print to stderr as well
* -i --priority prio: set the DVR thread priority to prio
* -l increases the verbosity (you can use multiple -l), logging to stdout in foreground mode or in /tmp/log when a daemon
* eg: -l -l -l
* -L --lnb specifies the adapter and LNB parameters (low, high and switch frequency)
* eg: -L *:9750-10600-11700 - sets all the adapters to use Universal LNB parameters (default)
* eg: -L *:10750-10750-10750 - sets the parameters for Sky NZ LNB using 10750 Mhz
* eg: -L 0:10750-10750-10750,1:9750-10600-11700 - adapter 0 has a SKY NZ LNB, adapter 1 has an Universal LNB
* -m xx: simulate xx as local mac address, generates UUID based on mac
* eg: -m 001122334455
* -Z --nopm ADAPTER1,ADAPTER2-ADAPTER4[,..] - specify no power management for the adapters (does not turn power off)
eg: --nopm 1-2
- turns off power management for adapter 1 to 2
--nopm *
- turns off power management for all adapters (recommended instead of --nopm 0-32)
- required for some Unicable LNBs
* -o --dvbapi host:port - specify the hostname and port for the dvbapi server (oscam). Port 9000 is set by default (if not specified)
* eg: -o 192.168.9.9:9000
192.168.9.9 is the host where oscam is running and 9000 is the port configured in dvbapi section in oscam.conf.
* eg: -o /tmp/camd.socket
/tmp/camd.socket is the local socket that can be used
* -p url: specify playlist url using X_SATIPM3U header
* eg: -p http://192.168.2.3:8080/playlist
- this will add X_SATIPM3U tag into the satip description xml
* -P port: use port number to listen for UDP socket in the RTP communication. port + 1000 will be used to listen by the sat>ip client (option -s)
* eg: -P 5500 (default): will use for the sat>ip server 5500 + 2*A and 5500 + 2*A + 1, where A is the adapter number.
6500 + 2*A and 6500 + 2*A + 1 - will be used by the sat>ip client
* -r --remote-rtp remote_rtp_host: send the rtp stream to remote_rtp_host instead of the ip the connection comes from
* eg: -r 192.168.7.9
* -R --document-root directory: document root for the minisatip web page and images
* -s --satip-servers DELSYS:host:port - specify the remote satip host and port with delivery system DELSYS, it is possible to use multiple -s
* DELSYS - can be one of: dvbs, dvbs2, dvbt, dvbt2, dvbc, dvbc2, isdbt, atsc, dvbcb ( - DVBC_ANNEX_B ) [default: dvbs2]
host - the server of the satip server
port - rtsp port for the satip server [default: 554]
eg: -s 192.168.1.2 -s dvbt:192.168.1.3:554 -s dvbc:192.168.1.4
- specifies 1 dvbs2 (and dvbs)satip server with address 192.168.1.2:554
- specifies 1 dvbt satip server with address 192.168.1.3:554
- specifies 1 dvbc satip server with address 192.168.1.4:554
* -O --satip-tcp Use RTSP over TCP instead of UDP for data transport
* -S --slave ADAPTER1,ADAPTER2-ADAPTER4[,..] - specify slave adapters
* Allows specifying bonded adapters (multiple adapters connected with a splitter to the same LNB)
Only one adapter needs to be master all others needs to have this parameter specified
eg: -S 1-2
- specifies adapter 1 to 2 as slave, in this case adapter 0 can be the master that controls the LNB
- the slave adapter will not control the LNB polarity or band, but it will just change the internal frequency to tune to a different transponder
- in this way the master will be responsible for changing the LNB polarity and band
* -t --cleanpsi clean the PSI from all CA information, the client will see the channel as clear if decrypted successfully
* -T --threads: enables/disable multiple threads (reduces memory consumptions) (default: ENABLED)
* -u --unicable unicable_string: defines the unicable adapters (A) and their slot (S), frequency (F) and optionally the PIN for the switch:
* The format is: A1:S1-F1[-PIN][,A2:S2-F2[-PIN][,...]]
eg: 2:0-1284[-1111]
* When * character is used before frequency, force 13V only for setup
* -j --jess jess_string - same format as -u
* -w --http-host http_server[:port]: specify the host and the port (if not 80) where the xml file can be downloaded from [default: default_local_ip_address:8080]
* eg: -w 192.168.1.1:8080
* -x --http-port port: port for listening on http [default: 8080]
* eg: -x 9090
* -X --xml PATH: the path to the xml that is provided as part of the satip protocol
* by default desc.xml is provided by minisatip without needing an additional file,
however satip.xml is included if it needs to be customized
* -y --rtsp-port rtsp_port: port for listening for rtsp requests [default: 554]
* eg: -y 5544
- changing this to a port > 1024 removes the requirement for minisatip to run as root
Alles anzeigen
Für CI wird libdvben50221 benötigt.
libdvbcsa ist im ZIP File enthalten, und jetzt HIER als .deb
Leider kenne ich mich noch nicht mit minisatip aus, deshalb kann ich auch noch nicht sagen was alles geht.
gruß pclin