usbTuner (multiple tuners on dm800) v0.7.3 ipk package (all new images) + GUI plugin |
sackklaus
User


Registration Date: 23.08.2009
Posts: 193
Which box: DM 800se PVR-S External Storage: keine Which Image: Merlin
 |
|
quote: |
Original von lenny123
Hi a.key,...I seem to be going around in circles, I am trying to make my af9015 dtt tuner to work on my dreambox,..this is what happens.
when I select the latomo plugin & chose the LIST command I can see my af9015 dvb-T tuner,..ok
when I chose the INSTALL command I get the following error
Installing driver modules for af9015
installation cancelled driver package not found. please check
/tmp/dm800-dvbt-af9015.tgz.
So then I ftp dm800-dvbt-af9015.tgz to the /tmp folder
I do the LIST & INSTALL command again & this time the INSTALL command gives me this message
no need to modify /usr/bin/Enigma2.sh (Already patched)
af9015 installation ready .Please reboot your DM800! Enjoy.
Execution terminated
After the reboot the usb tuner is not there.
Am I doing something wrong ?
I also have a hauppage nova T tuner & this works 100% |
Maybe this helps you: http://www.dream-multimedia-tv.de/board/...96294#post96294
__________________ TV: Samsung LE40A656 -|- Dreambox: DM800se (Sat) -|- Image: Merlin²
|
|
20.03.2011 13:56 |
|
|
dm800_hd
Newbie
Registration Date: 12.02.2011
Posts: 11
Which box: DM800 HD PVR External Storage: NFS Which Image: Sonstige
 |
|
Can ne1 recommend a DVB-C stick that is compatible with this usbTuner package?
|
|
20.03.2011 18:46 |
|
|
rouyi
Newbie
Registration Date: 13.09.2010
Posts: 1
Which box: DM 800S External Storage: HDD Which Image: IHAD
 |
|
i have a kworld 323u dvbt stick. its a em28xx device but icvs sees it as a 2883 usb device uknown. it works with sifteam but not here. what can been done?
|
|
26.03.2011 12:41 |
|
|
shadow013
Newbie
Registration Date: 29.03.2008
Posts: 95
Which box: DM 800C; DM 800se PVR-S External Storage: USB-Stick; HDD Which accessories: SMARGO, Wlan, Sundtek DVB-CT Stick Which Image: Gemini
 |
|
Hat den schon jemand den Cinergy T RC MKII Stich ans laufen gebracht?
wenn ich dir usbtuner_0.4.3b_dm800.ipk starte erkennt es den stick und will die module für den af9015 installieren.
Jedoch nach dem Restart is der Tuner leider nicht verfügbar.
@dm800:~# /usr/bin/lsusb
Bus 001 Device 002: ID 0ccd:0097 TerraTec Electronic GmbH Cinergy T RC MKII
Bus 001 Device 001: ID eb1a:51b2 eMPIA Technolo
Bus 003 Device 000: ID 0000:0000 CD-R/RW Drive
Bus 002 Device 000: ID 0000:0000 CD-R/RW Drive
Bus 001 Device 000: ID 0000:0000 CD-R/RW Drive
@dm800:~#
Bus 001 Device 001 is der Sundtek DVBC Stick.
Kann/muss ich noch was anderes machen ausser die usbtuners.ipk installieren?
|
|
26.03.2011 18:04 |
|
|
a.key
Newbie
Registration Date: 21.01.2010
Posts: 59
Which box: DM 800S External Storage: HDD Which Image: siehe Signatur
Thread Starter
 |
|
quote: |
Originally posted by shadow013
Hat den schon jemand den Cinergy T RC MKII Stich ans laufen gebracht?
wenn ich dir usbtuner_0.4.3b_dm800.ipk starte erkennt es den stick und will die module für den af9015 installieren.
Jedoch nach dem Restart is der Tuner leider nicht verfügbar.
@dm800:~# /usr/bin/lsusb
Bus 001 Device 002: ID 0ccd:0097 TerraTec Electronic GmbH Cinergy T RC MKII
Bus 001 Device 001: ID eb1a:51b2 eMPIA Technolo
Bus 003 Device 000: ID 0000:0000 CD-R/RW Drive
Bus 002 Device 000: ID 0000:0000 CD-R/RW Drive
Bus 001 Device 000: ID 0000:0000 CD-R/RW Drive
@dm800:~#
Bus 001 Device 001 is der Sundtek DVBC Stick.
Kann/muss ich noch was anderes machen ausser die usbtuners.ipk installieren? |
If you expect me to reply write in english.
|
|
28.03.2011 09:39 |
|
|
a.key
Newbie
Registration Date: 21.01.2010
Posts: 59
Which box: DM 800S External Storage: HDD Which Image: siehe Signatur
Thread Starter
 |
|
quote: |
Originally posted by rouyi
i have a kworld 323u dvbt stick. its a em28xx device but icvs sees it as a 2883 usb device uknown. it works with sifteam but not here. what can been done? |
Paste your lsusb from icvs and from sifteam. I'll see what I can do.
|
|
28.03.2011 09:40 |
|
|
chooleen
Newbie

Registration Date: 24.08.2006
Posts: 25
Which box: DM 500S; DM 800S External Storage: USB-Stick; HDD; NFS; CIFS Which Image: Gemini; DMM original; eigenes Image
 |
|
Hello,
thanks @a.key for your work.
I have DMM original Image (release-dm800-3.1.0.nfi) and GP3 (g3wizard_0.14-r0_mipsel.ipk) installed on DM800. I installed usbtuner_0.4.3b_dm800.ipk, but the package does't work. I have a Kworld 399U DVB-T USB stick that works pretty fine with other images (GP2 5.1). With your package, the box hangs on booting and I must unplug from power supply. The DVB-T stick is reported as Afatech9015 (1b80:e399).
Even box doesn't boot, i still can use telnet to make some tests. I replaced various files with the ones I have from other sources, but still no luck. I added manually in /usr/share/usb.ids the ID of this stick, but same result.
If I replace /lib/firmware/dvb-usb-af9015.fw with the old one (that works on GP2 5.1) the box finishes booting but the remote control and front standby button are dead.
BTW, with my old package, the box works fine, but the DVB-T stick is recognized as input device (as RC or keyboard), not as tuner B.
Can you guite me to right direction?
__________________

|
|
29.03.2011 08:35 |
|
|
a.key
Newbie
Registration Date: 21.01.2010
Posts: 59
Which box: DM 800S External Storage: HDD Which Image: siehe Signatur
Thread Starter
 |
|
quote: |
Originally posted by chooleen
Hello,
thanks @a.key for your work.
I have DMM original Image (release-dm800-3.1.0.nfi) and GP3 (g3wizard_0.14-r0_mipsel.ipk) installed on DM800. I installed usbtuner_0.4.3b_dm800.ipk, but the package does't work. I have a Kworld 399U DVB-T USB stick that works pretty fine with other images (GP2 5.1). With your package, the box hangs on booting and I must unplug from power supply. The DVB-T stick is reported as Afatech9015 (1b80:e399).
Even box doesn't boot, i still can use telnet to make some tests. I replaced various files with the ones I have from other sources, but still no luck. I added manually in /usr/share/usb.ids the ID of this stick, but same result.
If I replace /lib/firmware/dvb-usb-af9015.fw with the old one (that works on GP2 5.1) the box finishes booting but the remote control and front standby button are dead.
BTW, with my old package, the box works fine, but the DVB-T stick is recognized as input device (as RC or keyboard), not as tuner B.
Can you guite me to right direction? |
Well...
You gonna have to clean your system before you can fully debug your issues here. By cleaning I mean get rid of all files you put there for the usb tuner to work.
Assuming that the image you're using is using the kernel that the ipk I uploded is compatible with and that your tuner is supported (modules for it exist in the package) you can:
unplug your usbtuner
reinstall the ipk
plug your usb tuner in
try to autodetect the tuner: /usr/script/installdtt.sh
If your tunner is not autorecognized but is supported and you know your moduleset name do:
/usr/script/installdtt.sh <your_moduleset_name>
This will put the name of your moduleset into /etc/dtt.modules and the moduleloading/usbtuner starting script will pick it up and fire up what's needed.
/etc/init.d/restartDtt.sh should load all modules and start usbtuner is all went well.
You can of course do the whole thing manually.
Without using the scripts:
load your modules: modprobe <your_usb_tuner_module> or insmod /path/to/your/module - but with insmod you will have to load up all the dependent modules before you can insert the one for your tuner.
Once your module is loaded and USBTUNER conneted check if your have:
/dev/dvb/adapter1 - if yes then all should be ok and your should be able to start usbtuner binary:
/usr/bin/usbtuner 1
that will create additional entry in /proc/bus/nim_sockets for your second tuner. If it did then restart enigma2:
killall enigma2
and once enigma2 starts up go to settings, tunner config and check if your second tuner is there.
|
|
13.04.2011 11:33 |
|
|
a.key
Newbie
Registration Date: 21.01.2010
Posts: 59
Which box: DM 800S External Storage: HDD Which Image: siehe Signatur
Thread Starter
 |
|
usbtuner and new images/kernel |
 |
Guys - please bear in mind that since I updated the ipk package there has been a new kernel released for the DB800.
The ipk contains modules for kernel from DEC 2010 which will be incompatible with images running on kernel mentioned above.
Once I find time to update the image on my DM800 and have a play with it I will try to further improve the package but for now this package wont automagically work for new images like it was working for the ones with older kernel.
|
|
13.04.2011 11:38 |
|
|
thefirstbreath
Newbie
Registration Date: 08.12.2009
Posts: 5
Which box: DM 800S External Storage: HDD Which Image: Gemini
 |
|
did anyone post an answer to this yet?
I'd like to use the tt3600 s as well since I have great experience with that tuner so far.
quote: |
Original von DaDare
What about the TechnoTrend 3600S? |
|
|
19.04.2011 15:41 |
|
|
a.key
Newbie
Registration Date: 21.01.2010
Posts: 59
Which box: DM 800S External Storage: HDD Which Image: siehe Signatur
Thread Starter
 |
|
quote: |
Originally posted by kleinerjunge
Hi!
I tried Tevii S660 and it is recognized and supported by install script. I use the module dw2102 for it.
After configuring the Tuner in Tuner panel I unfortunately get no picture on the usb tuner. Connecting via Telnet and running dmesg, I see that I get always those messages, when recording on Tuner1 and switching to antoher channel to force DM800 to use the Tevii:
VTUNER ioctl 1
VTUNER ioctl 2
VTUNER ioctl 1
VTUNER ioctl 2
VTUNER ioctl 1
VTUNER ioctl 2
VTUNER ioctl 1
VTUNER ioctl 2
etc.
Someone knows where the problem is??
cu
KJ
EDIT, After some time I get those messages in telnet:
ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
ds3000_firmware_ondemand: Waiting for firmware upload(2)...
ds3000_firmware_ondemand: No firmware uploaded (timeout or file not found?)
ds3000_tune: Unable initialise the firmware |
Your firmware is not being loaded. Probably due to the fact that it's missing from the package.
Google for: dvb-fe-ds3000.fw and once downloaded upload it to /lib/firmware. Then restart your box and it should work. If not check the logs. and post them so that we can help you further.
|
|
27.04.2011 21:53 |
|
|
elchubi
Newbie
Registration Date: 04.08.2009
Posts: 8
Which box: DM 500+S External Storage: USB-Stick Which Image: PLi
 |
|
I just bought an ATSC tuner which, at least on the information I could gather, might work.
I will post updates I soon as I received it.
|
|
07.05.2011 14:51 |
|
|
saty77
Newbie

Registration Date: 06.07.2006
Posts: 17
Which box: DM 500S; DM 800S External Storage: USB-Stick; HDD; CIFS Which Image: Gemini Origin: From mamma
 |
|
RE: ideas for new package |
 |
a.key is it possible to update the dvb-t drivers in u'r package with the newer ones (HP-nova dated from 05-05) from the ItalysatDTT Downloader 0.5..??
Im also running Nemesis 2.2 and tried to update with ItalysatDTT but it downloads the drivers and when enabling they cannot access or smth so the old driver remains..
|
|
12.05.2011 17:53 |
|
|
elchubi
Newbie
Registration Date: 04.08.2009
Posts: 8
Which box: DM 500+S External Storage: USB-Stick Which Image: PLi
 |
|
It identified correctly my tuner but at first it didn't work.
After the reboot and looking at dmesg I found:
code: |
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
|
27 ms: 91 Starting /etc/rcS.d/S99finish.sh...
Linux video capture interface: v2.00
em28xx: New device Pinnacle Systems PCTV 800e @ 12 Mbps (2304:0227, interface 0, class 0)
em28xx: Device initialization failed.
em28xx: Device must be connected to a high-speed USB 2.0 port.
usbcore: registered new driver em28xx
em28xx driver loaded
em28xx_dvb: Unknown symbol mt352_attach
em28xx_dvb: Unknown symbol simple_tuner_attach
em28xx_dvb: Unknown symbol lgdt330x_attach
VIDEO0: set blank to 0
sync is off so we enable it
playback!
total video delay: 0 (0 ms)
VIDEO0: start decode
flush video decoder
VIDEO0: first pts 0x0
VIDEO0: set blank to 0
VIDEO0: stop decode
VIDEO0: set blank to 0
no decoder left in sync handling so disable xpt_sync
em28xx_dvb: Unknown symbol mt352_attach
em28xx_dvb: Unknown symbol simple_tuner_attach
em28xx_dvb: Unknown symbol lgdt330x_attach
|
|
I will try later with an USB extension cable, because tuner didn't fit connecting directly.
Any other suggestion based on the output?
Regards,
|
|
16.05.2011 22:22 |
|
|
elchubi
Newbie
Registration Date: 04.08.2009
Posts: 8
Which box: DM 500+S External Storage: USB-Stick Which Image: PLi
 |
|
I'm making progress with the card, now I got more info. on dmesg but still failing to load some modules:
code: |
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
|
Linux video capture interface: v2.00
em28xx: New device Pinnacle Systems PCTV 800e @ 480 Mbps (2304:0227, interface 0 , class 0)
em28xx #0: chip ID is em2882/em2883
em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27 02 d0 12 5c 03 8e 16 a4 1c
em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00
em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03
em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 38 00 30 00 30 00
em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 37 00 30 00 39 00 30 00
em28xx #0: i2c eeprom b0: 31 00 30 00 38 00 32 00 32 00 31 00 30 00 00 00
em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x02e5a4bf
em28xx #0: EEPROM info:
em28xx #0: AC97 audio (5 sample rates)
em28xx #0: 500mA max power
em28xx #0: Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
em28xx #0: Identified as Pinnacle PCTV HD Pro Stick (card=17)
em28xx #0: Config register raw data: 0xd0
em28xx #0: AC97 vendor ID = 0xffffffff
em28xx #0: AC97 features = 0x6a90
em28xx #0: Empia 202 AC97 audio processor detected
em28xx #0: v4l2 driver version 0.1.2
em28xx #0: V4L2 video device registered as video0
em28xx #0: V4L2 VBI device registered as vbi0
usbcore: registered new driver em28xx
em28xx driver loaded
em28xx_dvb: Unknown symbol mt352_attach
em28xx_dvb: Unknown symbol simple_tuner_attach
em28xx_dvb: Unknown symbol lgdt330x_attach
|
|
|
|
17.05.2011 02:36 |
|
|
|
|
 |
|