i-have-a-dreambox.com | Dreambox - Support

Register Calendar Members List Team Members Galerie to Portal Go to the Main Page

Boardrules Frequently Asked Questions Statistik Statistik Search Pinwand Dreambox Blog Ihad/Gemini Fan-Shop
i-have-a-dreambox.com | Dreambox - Support » ...::: Archiv - The Gemini Project (GP3, GP2 und GP) :::... » ...::: The Gemini Project 2 :::... » The Gemini Project DM8000 » komische probleme, bitte lesen » Hello Guest [Login|Register]
Last Post | First Unread Post Print Page | Add Thread to Favorites
Pages (2): « previous 1 [2] Post New Thread Post Reply
Go to the bottom of this page komische probleme, bitte lesen
Author
Post « Previous Thread | Next Thread »
² Bad °° Boy ² ² Bad °° Boy ² is a male
Dreamer


images/avatars/avatar-1296.gif

Registration Date: 03.12.2004
Posts: 1,399
Which box: DM500HD; DM900; DM8000
External Storage: USB-Stick; SD-Card; HDD; NAS
Which accessories: WHS Belinea o. Center, QNAP TS-453A, Teufel THX Sondbar, Harmony One
Which Image: OE 2.5; OE 2.0; DMM original
Welcher Bildschirm: LG 55"=8k, 37" FullHD=500HD
Origin: NRW

Thread Starter Thread Started by ² Bad °° Boy ²
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

is ne fritzbox 7270

ähm, bezüglich namen ändern, da tritt ja schon gleich das erste problem wieder in kraft, ich kan ja nich auf die box zugreifen wens gemini5 oben is Zunge raus

also nich bei der 8c

also änder ich den den der 8k?

bleibt ja auch nix weiter übrig als alternative lösung oder?

bzw. hab ja die 8c nun wia lowfat oben mit gemini 4.7, kan ich mit gem gebootetem gemini via lowfat an die flash setting kommen vom gemini 5?

übrigens mal dank an dieser stelle, dasde dich so geduldig um mich und die boxen bemühst Augenzwinkern

__________________

03.07.2010 15:02 ² Bad °° Boy ² is offline Send an Email to ² Bad °° Boy ² Search for Posts by ² Bad °° Boy ² Add ² Bad °° Boy ² to your Buddy List Add ² Bad °° Boy ² to your Contact List AIM Screen Name of ² Bad °° Boy ²: Skype: Baddy81 View the MSN Profile for ² Bad °° Boy ²
kodo kodo is a male
V.I.P.


images/avatars/avatar-18184.jpg

Registration Date: 04.08.2004
Posts: 11,413
Which box: DM500; DM600; D-Box; andere
External Storage: keine
Which accessories: Atemio Nemesis, Atemio 6100, Coolstream Neo² Cable, Octagon SF-1028P@TitanNit
Which Image: Gemini; PLi; Sonstige
Welcher Bildschirm: Toshiba 50L4363D
Origin: Ruhrpott

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

quote:
Original von ² Bad °° Boy ²
is ne fritzbox 7270

ähm, bezüglich namen ändern, da tritt ja schon gleich das erste problem wieder in kraft, ich kan ja nich auf die box zugreifen wens gemini5 oben is Zunge raus

also nich bei der 8c

also änder ich den den der 8k?

bleibt ja auch nix weiter übrig als alternative lösung oder?

bzw. hab ja die 8c nun wia lowfat oben mit gemini 4.7, kan ich mit gem gebootetem gemini via lowfat an die flash setting kommen vom gemini 5?

übrigens mal dank an dieser stelle, dasde dich so geduldig um mich und die boxen bemühst Augenzwinkern

Ah, Fritzbox mal wieder ... lösch doch mal in der Fritze die bekannten Netzwerkgeräte, bevor du dich an den Hostnamen machst.

__________________
Gruß, Stephan
-------------------------------------------------------------------------


03.07.2010 15:10 kodo is offline Search for Posts by kodo Add kodo to your Buddy List
maxl maxl is a male
Dreambox Admin


images/avatars/avatar-19367.jpg

Registration Date: 17.08.2005
Posts: 11,455
Which box: DM600; DM800se; DM7080HD; DM8000
External Storage: USB-Stick; HDD; NFS; CIFS
Which accessories: Harmony Ultimate
Which Image: Gemini; OE 2.2; DMM original
Welcher Bildschirm: Epson EH-TW4400 (Beamer)
Origin: Österreich

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Ich würde mal versuchen je andere feste IP einzustellen, hatte auch mal sowas und war mir sicher dass kein anderes gerät die ip hat smile

__________________
Kein Support per PN - Hilfe gesucht ? schau mal ins Gemini Project WIKI!
Folge uns auch auf FACEBOOK !

03.07.2010 15:19 maxl is offline Homepage of maxl Search for Posts by maxl Add maxl to your Buddy List
² Bad °° Boy ² ² Bad °° Boy ² is a male
Dreamer


images/avatars/avatar-1296.gif

Registration Date: 03.12.2004
Posts: 1,399
Which box: DM500HD; DM900; DM8000
External Storage: USB-Stick; SD-Card; HDD; NAS
Which accessories: WHS Belinea o. Center, QNAP TS-453A, Teufel THX Sondbar, Harmony One
Which Image: OE 2.5; OE 2.0; DMM original
Welcher Bildschirm: LG 55"=8k, 37" FullHD=500HD
Origin: NRW

Thread Starter Thread Started by ² Bad °° Boy ²
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

also zur fb, abe alle eingetragenen geräte rausgeschmissen soweit möglich!

habe dan das gemini 5 nun wieder aufe 8k geprügelt, das ging auch, nun achtung!

weiterhinn 8c mit gemini 7.4 im netz die 8k bleibt nach dem flashen bei 50 % DMM stehen!

ip iner fb nun für die 8k 192.168.0.2 ( aktuell kein weiteres gerät mit der ip im netz!) (aber habe schon im bios die ip der8k auf .25 gesetzt!)

habe nun die 8c runtergefahren und nochmals die 8k neu gestartet, bleibt wieder bei 50 % stehen!

habe nun die 8c vom strom genommen, die 8k stand dabei noch immer auf 50% als ich wiederkam vom 8c voll abschalten lief die 8k weiter (zufall)?

bin zumindest ratlos, aber imo erstmal germany schauen aufer 8k mit gemini 5 ...

__________________

03.07.2010 15:59 ² Bad °° Boy ² is offline Send an Email to ² Bad °° Boy ² Search for Posts by ² Bad °° Boy ² Add ² Bad °° Boy ² to your Buddy List Add ² Bad °° Boy ² to your Contact List AIM Screen Name of ² Bad °° Boy ²: Skype: Baddy81 View the MSN Profile for ² Bad °° Boy ²
² Bad °° Boy ² ² Bad °° Boy ² is a male
Dreamer


images/avatars/avatar-1296.gif

Registration Date: 03.12.2004
Posts: 1,399
Which box: DM500HD; DM900; DM8000
External Storage: USB-Stick; SD-Card; HDD; NAS
Which accessories: WHS Belinea o. Center, QNAP TS-453A, Teufel THX Sondbar, Harmony One
Which Image: OE 2.5; OE 2.0; DMM original
Welcher Bildschirm: LG 55"=8k, 37" FullHD=500HD
Origin: NRW

Thread Starter Thread Started by ² Bad °° Boy ²
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

guten morgen ihr lieben, mal nen neuer zwischen stand!

bin mal anders vorgegangen als sonst, und versuche nun heraus zu finden, ob eventuell einer der plugins verantwortlich ist?!?

und siehe da (vielleicht nur zufall?)

nach einrichten des EUP (embedded-uptime-project)
hängt sie wieder!

also ok dachte ich mir, schmeisstes EUP eben wieder raus, den obwohl sie bei ca 50% stehen bleibt, genauer gesagt genau an dem übergang (soweit ich das beurteilen kann) wo im bootlogo (tv) unten links (gedächtniss protokoll)
Loading Enigma ² kommen sollte und danach die rädchen oben links...

naja hier mal für die profis wieder der aktuelle log, wobei mir eben der eintrag zum schluss auf fällt der ja aussagt, das die .sh nich geöffnet werden könne?!?

ok diese wurde auch bearbeutet zwecks EUP autostart, d.h. genauer den eintrag "[ -e /var/bin/stbup ] && /var/bin/stbup -C /var/etc/stbup.conf &"

habe ich an den schluss gehangen!
aber auch wieder entfernt! und box hängt dennoch!

daher setze ich auch den "code" unten mal mit bei zur "analyse"


code:
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
40:
41:
42:
43:
44:
45:
46:
47:
48:
49:
50:
51:
52:
53:
54:
55:
56:
57:
58:
59:
60:
61:
62:
63:
64:
65:
66:
67:
68:
69:
70:
71:
72:
73:
74:
75:
76:
77:
78:
79:
80:
81:
82:
83:
84:
85:
86:
87:
88:
89:
90:
91:
92:
93:
94:
95:
96:
97:
98:
99:
100:
101:
102:
103:
104:
105:
106:
107:
108:
109:
110:
111:
112:
113:
114:
115:
116:
117:
118:
119:
120:
121:
122:
123:
124:
125:
126:
127:
128:
129:
130:
131:
132:
133:
134:
135:
136:
137:
138:
139:
140:
141:
142:
143:
144:
145:
146:
147:
148:
149:
150:
151:
152:
153:
154:
155:
156:
157:
158:
159:
160:
161:
162:
163:
164:
165:
166:
167:
168:
169:
170:
171:
172:
173:
174:
175:
176:
177:
178:
179:
180:
181:
182:
183:
184:
185:
186:
187:
188:
189:
190:
191:
192:
193:
194:
195:
196:
197:
198:
199:
200:
201:
202:
203:
204:
205:
206:
207:
208:
209:
210:
211:
212:
213:
214:
215:
216:
217:
218:
219:
220:
221:
222:
223:
224:
225:
226:
227:
228:
229:
230:
231:
232:
233:
234:
235:
236:
237:
238:
239:
240:
241:
242:
243:
244:
245:
246:
247:
248:
249:
250:
251:
252:
253:
254:
255:
256:
257:
258:
259:
260:
261:
262:
263:
264:
265:
266:
267:
268:
269:
270:
271:
272:
273:
274:
275:
276:
277:
278:
279:
280:
281:
282:
283:
284:
285:
286:
287:
288:
289:
290:
291:
292:
293:
294:
295:
296:
297:
298:
299:
300:
301:
302:
303:
304:
305:
306:
307:
308:
309:
310:
311:
312:
313:
314:
315:
316:
317:
318:
319:
320:
321:
322:
323:
324:
325:
326:
327:
328:
329:
330:
331:
332:
333:
334:
335:
336:
337:
338:
339:
340:
341:
342:
343:
344:
345:
346:
347:
348:
349:
350:
351:
352:
353:
354:
355:
356:
357:
358:
359:
360:
361:
362:
363:
364:
365:
366:
367:
368:
369:
370:
371:
372:
373:
374:
375:
376:
377:
378:
379:
380:
381:
382:
383:
384:
385:
386:
387:
388:
389:
390:
391:
392:
393:
394:
395:
396:
397:
398:
399:
400:
401:
402:
403:
404:
405:
406:
407:
408:
409:
410:
411:
412:
413:
414:
415:
416:
417:
418:
419:
420:
421:
422:
423:
424:
425:
426:
427:
428:
429:
430:
431:
432:
433:
434:
435:
436:
437:
438:
439:
440:
441:
442:
443:
444:
445:
446:
447:
448:
449:
450:
451:
452:
453:
454:
455:
456:
457:
458:
459:
460:
461:
462:
463:
464:
465:
466:
467:
468:
469:
470:
471:
472:
473:
474:
475:
476:
477:
478:
479:
480:
481:
482:
483:
484:
485:
486:
487:
488:
489:
490:
491:
492:
493:
494:
495:
496:
BCM97400
AB
FFFFFFFF
1s
Sync=0
LLMB=0
L2=0
RAC_I=0
RAC_D=0

Copy Code...34TUCV

(c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM8000
FIRST STAGE 1.00 {BO23456}

2ND STAGE OK, build #76 (20091014)

0.000  - BCM board setup
Configure MEMC1_2........ Done
0.039  - fp init
FP version 7 detected
0.106  - ca init
0.818  - load config
1.398  - config loaded.
 * press [S] to enter setup
OLED found!
 BOOT #76(20091014)
 - NAND PROBE: 2c da 80 95 (normal)
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
USB: New device connected to bus 0 hub 1 port 1
USB: Locating Class 09 Vendor 04CC Product 1520: USB Hub
USB: New device connected to bus 0 hub 1 port 2
USB: Locating Class 08 Vendor 058F Product 6362: Blacklisted.
USB wait failed.
waiting for USB failed!
detected jffs2 blocksize: 128kb
++++++++++++++++++++++++
dreamupd initialized
Scanning JFFS2 FS: . done.
/flash/bootlogo.elf
bootlogo size: 195531
using 1920x1080i (50.00 Hz)
create surface 1920 1080
Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@saillard.org>
parsing JPEG header..
JPEG Size: 1280x720
/flash/vmlinux.gz
<5>Linux version 2.6.18-7.3-dm8000 (tux@tux) (gcc version 4.4.3 (GCC) ) #1 SMP Tue Apr 27 20:37:33 CEST 2010
Fetching vars from bootloader... none present, using defaults.
Detected 256 MB on MEMC0 (strap 0x2219c310)
<4>WARNING: read invalid MAC address ff:ff:ff:ff:ff:ff from flash @ 0xbffff824
Default command line =
root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
2 831ffed8 83040e98
g_board_RAM_size=256MB
Options: sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=1
CPU revision is: 0002a042
FPU revision is: 00130001
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
---> memsize from bootloader: 158
User-defined physical RAM map:
node [00000000, 09e00000: RAM]
node [09e00000, 06200000: RSVD]
<5>Reserving 98 MB upper memory starting at 09e00000
<7>On node 0 totalpages: 65536
<7>  DMA zone: 65536 pages, LIFO batch:15
Built 1 zonelists.  Total pages: 65536
<5>Kernel command line: console=ttyS0,115200 root=/dev/mtdblock3 rootfstype=jffs2 rw
before init RAC 0x01e0701f    0x0000000f    0x2fff0000
after init RAC 0x01e0705f    0x0000000f    0x2fff0000
======> Before RAC_init:$22s5=00000020, $22s6(CBA)=11f0000c
@B1F0_001C=00000001, @B1F0_0004=2fff0000, @B1F0_0000=01e0701f, @B1F0_0008=0000000f
CBA = 11f00000    VALUE = 255    PAR_VAL2 = 0fff0000
RAC0 = b1f00000    RAC1 = b1f00008    RAC_RANGE = b1f00004
RAC_VALUE = 00087000
******* Using CFE setting for RAC
******* $22s0=e30e3406,    $22s5=00000020,    $22s6=11f0000c
Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, linesize 64 bytes.
Synthesized TLB refill handler (23 instructions).
Synthesized TLB load handler fastpath (37 instructions).
Synthesized TLB store handler fastpath (37 instructions).
Synthesized TLB modify handler fastpath (36 instructions).
PID hash table entries: 2048 (order: 11, 8192 bytes)
Found MIPS counter frequency: 203 Mhz
Using 202.501 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 155392k/262144k available (3086k kernel code, 106632k reserved, 562k data, 152k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction...  available.
plat_prepare_cpus: ENABLING 2nd Thread...
TP0: prom_boot_secondary: Kick off 2nd CPU...
CPU revision is: 0002a042
FPU revision is: 00130001
Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, linesize 64 bytes.
Synthesized TLB refill handler (23 instructions).
Brought up 2 CPUs
migration_cost=1000
NET: Registered protocol family 16
registering PCI controller with io_map_base unset
registering PCI controller with io_map_base unset
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
        PCI DEV in slot 1, ID=168c:001a
PCI PnP: PCI_BAR[0] = ffff0000
PCI PnP: size requested is 10000
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
brcm-pm: disabling power to USB block
brcm-pm: disabling power to ENET block
brcm-pm: disabling power to SATA block
JFFS2 version 2.2. (NAND) (SUMMARY)  (C) 2001-2006 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 65) is a 16550A
brcm-pm: enabling power to ENET block
Broadcom BCM7400 P42 Ethernet Network Device v2.0 Apr 27 2010 20:36:08
SUNDRY revision = 74000032, have IP Hdr Opt=1
Config Internal PHY Through MDIO: 100 MB Full-Duplex (auto-neg)
brcm-pm: enabling power to SATA block
ata1: SATA max UDMA/133 cmd 0xB0510000 ctl 0xB0510020 bmdma 0xB0510030 irq 42
ata2: SATA max UDMA/133 cmd 0xB0510100 ctl 0xB0510120 bmdma 0xB0510130 irq 42
scsi0 : sata_svw
ata1: SATA link down (SStatus 4 SControl 300)
ATA: abnormal status 0x7F on port 0xb051001c
scsi1 : sata_svw
ata2: SATA link down (SStatus 4 SControl 300)
ATA: abnormal status 0x7F on port 0xb051011c
4587 kb/s
 - NAND PROBE: 2c da 80 95
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Unknown NAND 256MiB 3,3V 8-bit)
Scanning device for bad blocks
Creating 7 MTD partitions on "NAND 256MiB 3,3V 8-bit":
0x0000000000000000-0x0000000010000000 : "complete"
0x0000000000000000-0x0000000000100000 : "loader"
0x0000000000100000-0x0000000000400000 : "boot partition"
0x0000000000400000-0x0000000004000000 : "root partition"
0x0000000004000000-0x0000000008000000 : "home partition"
0x0000000008000000-0x000000000f800000 : "unused partition"
0x000000000f800000-0x0000000010000000 : "preset partition"
ehci_hcd_brcm_init: Initializing 2 EHCI controller(s)
brcm-pm: enabling power to USB block
10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-0)
drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller
 - USB h/w setup mode <B>
 - USB power enable set for active LOW mode
brcm-ehci brcm-ehci.0: BRCM EHCI
brcm-ehci brcm-ehci.0: new USB bus registered, assigned bus number 1
brcm-ehci brcm-ehci.0: irq 62, io mem 0x10480300
brcm-ehci brcm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-1)
drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller
brcm-ehci-1 brcm-ehci-1.1: BRCM EHCI
brcm-ehci-1 brcm-ehci-1.1: new USB bus registered, assigned bus number 2
brcm-ehci-1 brcm-ehci-1.1: irq 57, io mem 0x10480500
brcm-ehci-1 brcm-ehci-1.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd_brcm_init: Initializing 2 OHCI controller(s)
2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-0)
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
 - Resetting at b0480408
<-- brcm_start_hc
brcm-ohci-0 brcm-ohci-0.0: BRCM OHCI
brcm-ohci-0 brcm-ohci-0.0: new USB bus registered, assigned bus number 3
brcm-ohci-0 brcm-ohci-0.0: irq 63, io mem 0x10480400
usb 1-1: new high speed USB device using brcm-ehci and address 2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-1)
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
 - Resetting at b0480608
<-- brcm_start_hc
brcm-ohci-1 brcm-ohci-1.1: BRCM OHCI
brcm-ohci-1 brcm-ohci-1.1: new USB bus registered, assigned bus number 4
usb 1-1: configuration #1 chosen from 1 choice
brcm-ohci-1 brcm-ohci-1.1: irq 64, io mem 0x10480600
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 3 ports detected
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usb 1-2: new high speed USB device using brcm-ehci and address 3
usb 1-2: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
isa bounce pool size: 16 pages
  Vendor: Generic   Model: USB SD Reader     Rev: 1.00
  Type:   Direct-Access                      ANSI SCSI revision: 00
sd 2:0:0:0: Attached scsi removable disk sda
sd 2:0:0:0: Attached scsi generic sg0 type 0
  Vendor: Generic   Model: USB CF Reader     Rev: 1.01
  Type:   Direct-Access                      ANSI SCSI revision: 00
sd 2:0:0:1: Attached scsi removable disk sdb
sd 2:0:0:1: Attached scsi generic sg1 type 0
  Vendor: Generic   Model: USB SM Reader     Rev: 1.02
  Type:   Direct-Access                      ANSI SCSI revision: 00
sd 2:0:0:2: Attached scsi removable disk sdc
sd 2:0:0:2: Attached scsi generic sg2 type 0
  Vendor: Generic   Model: USB MS Reader     Rev: 1.03
  Type:   Direct-Access                      ANSI SCSI revision: 00
sd 2:0:0:3: Attached scsi removable disk sdd
sd 2:0:0:3: Attached scsi generic sg3 type 0
VFS: Mounted root (jffs2 filesystem).
Freeing unused kernel memory: 152k freed
INIT: version 2.86 booting
stb_core: module license 'Proprietary' taints kernel.
FP Version 7
input: dreambox front panel as /class/input/input0
4013126 ms:
47 ms: 28 Starting /etc/rcS.d/S02sysfs...
9 ms: =s
Startting the hotplug events dispatcher
Synthesizing the initial hotplug events
Waiting for /dev to be fully populated
wlan: svn r3314
ath_hal: 2008-08-15 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, REGOPS_FUNC, DFS, XR)
ath_pci: svn r3314
Atheros HAL provided by OpenWrt, DD-WRT and MakSat Technologies
MadWifi: ath_getchannels: HAL returned 26 channels.
MadWifi: ath_getchannels: Channel   1 (2412 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel   1 (2412 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel   2 (2417 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel   2 (2417 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel   3 (2422 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel   3 (2422 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel   4 (2427 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel   4 (2427 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel   5 (2432 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel   5 (2432 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel   6 (2437 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel   6 (2437 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel   7 (2442 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel   7 (2442 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel   8 (2447 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel   8 (2447 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel   9 (2452 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel   9 (2452 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel  10 (2457 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel  10 (2457 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel  11 (2462 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel  11 (2462 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel  12 (2467 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel  12 (2467 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_getchannels: Channel  13 (2472 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_CCK CF_2GHZ
MadWifi: ath_getchannels: Channel  13 (2472 MHz) Max Tx Power 16 dBm (hw limited) [16 hw 20 reg] Flags CF_OFDM CF_2GHZ
MadWifi: ath_attach: Switching rfkill capability off
ath_rate_sample: 1.2 (svn r3314)
MadWifi: ath_attach: Switching per-packet transmit power control off
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: ath_announce: Use hw queue 1 for WME_AC_BE traffic
wifi0: ath_announce: Use hw queue 0 for WME_AC_BK traffic
wifi0: ath_announce: Use hw queue 2 for WME_AC_VI traffic
wifi0: ath_announce: Use hw queue 3 for WME_AC_VO traffic
wifi0: ath_announce: Use hw queue 8 for CAB traffic
wifi0: ath_announce: Use hw queue 9 for beacons
ath_pci: wifi0: Atheros 2413: mem=0xd1000000, irq=33
done
3605 ms: 31 Starting /etc/rcS.d/S03udev...
10 ms: =s
15 ms: 34 Starting /etc/rcS.d/S04bootup...
7 ms: 10
cdfs 2.6.18 loaded.
mount: mounting /dev/sda1 on /me1030 ms: 12
dia/hdd failed: No such file or directory
18 ms: 14
20 ms: 15

/dev/sda:
 setting standby73 ms: 16
 to 120 (10 minutes)
 HDIO_DRIVE_CMD(setidle) failed: Invalid exchange

/dev/sda:
 setting using_dma to 1 (on)
 HDIO_SET_DMA failed: Invalid argument
 HDIO_GET_DMA failed: Invalid argument

/dev/sda:
 setting xfermode to 66 (UltraDMA mode2)
 HDIO_DRIVE_CMD(setxfermode) failed: Invalid exchange

/dev/sda:
 setting acoustic man45 ms: 17
agement to 128
 HDIO_DRIVE_CMD:ACOUSTIC failed: Invalid exchange
 HDIO_DRIVE_CMD(identify) failed: Invalid exchange
input: dreambox remote control (native) as /class/input/input1
input: dreambox advanced remote control (native) as /class/input/input2
input: dreambox ir keyboard as /class/input/input3
input: dreambox ir mouse as /class/input/input4
fpga init
done OK 0
enter base init, xvd 20090807, vdc 20090807, rap 20090430, xpt 20090430
!!! kernMemSize: 158 MB
smca set muxes
smcb set muxes
smcc set muxes
SMCA: controller reset timed out
SMCB: controller reset timed out
maskffffffff
using fpga version 2a
tsmux set tsports reg 02 to val dc
tsmux set tsports reg 02 to val dc
tsmux set tsports reg 03 to val fe
tsmux set tsports reg 03 to val fe
tsmux set cisource reg 00 to val 55
tsmux set cisource reg 00 to val 55
tsmux set cisource reg 01 to val 55
tsmux set cisource reg 01 to val 55
register adapter
register adapter
register adapter
register adapter
register adapter
HDMI: no device attached
set sb to 3(2)
set fb to 2(-1)
set input to 0
set fb to 2(-1)
bcm_video_analog_port_setup (fmt=7)
SET FORMAT: display[1], format=7
display 0 uses vbi path 1
display 1 uses vbi path 0
HDMI: hotplug handler!
HDMI: no device attached
using 50.00Hz as MonitorRefreshRate
SET FORMAT: display[0], format=34
set fb to 2(0)
bcm_video_analog_port_setup (fmt=7)
SET FORMAT: display[1], format=7
Write AVS: 00 00 00 00 00 00 00 03 00 00 00 00 00 00
Write AVS: 00 00 00 00 00 00 18 63 00 00 00 00 00 00
set sb to 3(2)
Write AVS: 40 40 00 00 00 00 00 03 00 02 00 00 00 ff
set sb to 3(2)
disable wss on display 0
disable wss on display 1
bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
udevd-event[490]: node_symlink: rename(/dev/fb.udev-tmp, /dev/fb) failed: Is a directory

enable mad
VIDEO0: set fallback framerate to 60000
VIDEO0: set progressive override mode to 1
VIDEO0: set streamtype!
set MPEG2
sw rave disabled!
enable mad
VIDEO1: set fallback framerate to 60000
VIDEO1: set progressive override mode to 1
VIDEO1: set streamtype!
set MPEG2
sw rave disabled!
set ac3 to downmix
set aac to downmix
DVB: registering new adapter (BCM7400).
autodetecting NIMs...
ret: -145
ret: -145
Initializing adapter 0 (BCM4501 (internal)-DVB-S2)
bcm4501: found 4501, revision 2(c0)
bcm_initAP
BCM4501: upload & start firmware
DVB: registering frontend 0 (bcm4501)...
Initializing adapter 1 (BCM4501 (internal)-DVB-S2)
DVB: registering frontend 0 (bcm4501)...
CI removed...
CI removed...
CI removed...
init ALSA!
vdc pip init workaround
sync is off so we enable it
playback!
total video delay: 0 (0 ms)
CI removed...
VIDEO1: start decode
flush video decoder
VIDEO1 got pts failed !!!! (ret 0)
VIDEO1: first pts 0x0
VIDEO1: framerate changed 8
VIDEO1: resolution changed (720 576)
VIDEO1: aspect changed 2
VIDEO1: stop decode
no decoder left in sync handling so disable xpt_sync
9392 ms: 18
using 50.00Hz as MonitorRefreshRate
SET FORMAT: display[0], format=25
bcm_video_analog_port_setup (fmt=7)
SET FORMAT: display[1], format=7
set current avs auto aspect to 16:9
disable wss on display 0
disable wss on display 1
set sb to 3(1)
Write AVS: 40 40434 ms: 19
 00 00 00 00 00 01 00 02 00 00 00 ff
7 ms: 20
82 ms: 21
8 ms: 22
VIDEO0: set blank to 0
sync is off so we enable it
playback!
total video delay: 0 (0 ms)
10 ms: 23
VIDEO0: start decode
flush video decoder
VIDEO0 got pts failed !!!! (ret 0)
VIDEO0: first pts 0x0
VIDEO0: framerate changed 3
VIDEO0: resolution changed (1280 720)
VIDEO0: aspect changed 3
set current avs auto aspect to 16:9
disable wss on display 0
disable wss on display 1
set current avs auto aspect to 16:9
disable wss on display 0
disable wss on display 1
set sb to 3(1)
VIDEO0: set blank to 0
VIDEO0: stop decode
VIDEO0: set blank to 0
no decoder left in sync handling so disable xpt_sync
ldconfig: Can't open configuration file /etc/ld.so.conf: No such file or directory
8850 ms: 24
31 ms: 25
20 ms: =s
61 ms: 37 Starting /etc/rcS.d/S10tpmd...
19 ms: =s
43 ms: 40 Starting /etc/rcS.d/S20modutils.sh...
20 ms: =s
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon                       [ ok ]
964 ms: 43 Starting /etc/rcS.d/S21avahi-daemon...
11 ms: =s
50 ms: 46 Starting /etc/rcS.d/S38devpts.sh...
11 ms: =s
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... done.
728 ms: 49 Starting /etc/rcS.d/S40networking...
mtd->read(0x939 bytes from 0x645000) returned ECC error
JFFS2 notice: (27) check_node_data: wrong data CRC in data node at 0x00645000: read 0xd608c0ba, calculated 0xda5f595a.
INIT: Entering runlevel: 3
Starting Dropbear SSH server: dropbear.
Starting internet superserver: inetd.
Starting syslogd/klogd: done
* starting FTP Server: vsftpd... chown: unknown user ftp
Starting automounter: done.
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon                       [ ok ]
INIT: cannot execute "/usr/bin/enigma2.sh"
INIT: cannot execute "/usr/bin/enigma2.sh"
INIT: cannot execute "/usr/bin/enigma2.sh"
INIT: cannot execute "/usr/bin/enigma2.sh"
INIT: cannot execute "/usr/bin/enigma2.sh"
INIT: cannot execute "/usr/bin/enigma2.sh"
INIT: cannot execute "/usr/bin/enigma2.sh"
INIT: cannot execute "/usr/bin/enigma2.sh"
INIT: cannot execute "/usr/bin/enigma2.sh"
INIT: cannot execute "/usr/bin/enigma2.sh"
INIT: Id "e2" respawning too fast: disabled for 5 minutes
INIT: no more processes left in this runlevel
INIT: cannot execute "/usr/bin/enigma2.sh"
INIT: cannot execute "/usr/bin/enigma2.sh"
INIT: cannot execute "/usr/bin/enigma2.sh"
INIT: cannot execute "/usr/bin/enigma2.sh"
INIT: cannot execute "/usr/bin/enigma2.sh"
INIT: cannot execute "/usr/bin/enigma2.sh"
INIT: cannot execute "/usr/bin/enigma2.sh"
INIT: cannot execute "/usr/bin/enigma2.sh"
INIT: cannot execute "/usr/bin/enigma2.sh"
INIT: cannot execute "/usr/bin/enigma2.sh"
INIT: Id "e2" respawning too fast: disabled for 5 minutes


enigma2.sh rechte 755
code:
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16:
17:
18:
19:
20:
21:
22:
23:
24:
25:
26:
27:
28:
29:
30:
31:
32:
33:
34:
35:
36:
37:
38:
39:
#!/bin/sh

/usr/bin/showiframe /boot/backdrop.mvi

#Gemini Binarys
start-stop-daemon -S -b -n gdaemon -a /usr/bin/gdaemon
#Extern Binarys
[ -f /usr/bin/stbup ] && start-stop-daemon -S -b -n stbup -a /usr/bin/stbup -- -C /etc/stbup.conf
#Scripte
/usr/script/inadyn_script.sh start
/usr/script/djmount_script.sh start
/usr/script/ushare_script.sh start

#Enigma
LD_PRELOAD=/usr/lib/libopen.so.0.0 /usr/bin/enigma2

ret=$?

case $ret in
	1)
		/sbin/halt
		;;
	2)
		/sbin/reboot
		;;
	4)
		/sbin/rmmod lcd
		/usr/sbin/fpupgrade --upgrade 2>&1 | tee /home/root/fpupgrade.log
		sleep 1;
		/sbin/rmmod fp
		/sbin/modprobe fp
		/sbin/reboot
		;;
	11)
		/sbin/init 4
		;;
	*)
		;;
esac


nen par komische einträge fallen mir noch auf, ob die aber was zu bedeuten haben sagt ihr mir lieber bitte Augenzwinkern

code:
1:
<4>WARNING: read invalid MAC address ff:ff:ff:ff:ff:ff from flash @ 0xbffff824

code:
1:
ldconfig: Can't open configuration file /etc/ld.so.conf: No such file or directory

code:
1:
2:
mtd->read(0x939 bytes from 0x645000) returned ECC error
JFFS2 notice: (27) check_node_data: wrong data CRC in data node at 0x00645000: read 0xd608c0ba, calculated 0xda5f595a.


__________________

This post has been edited 1 time(s), it was last edited by ² Bad °° Boy ²: 04.07.2010 11:28.

04.07.2010 10:39 ² Bad °° Boy ² is offline Send an Email to ² Bad °° Boy ² Search for Posts by ² Bad °° Boy ² Add ² Bad °° Boy ² to your Buddy List Add ² Bad °° Boy ² to your Contact List AIM Screen Name of ² Bad °° Boy ²: Skype: Baddy81 View the MSN Profile for ² Bad °° Boy ²
Gonzo28 Gonzo28 is a male
Stammuser


Registration Date: 25.12.2008
Posts: 363
Which box: DM 800S; DM 8000HD
External Storage: USB-Stick; HDD
Which Image: Gemini
Welcher Bildschirm: LG60pk550 60" Plasma
Origin: Kerpen

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

falsche MAC Adresse?
Hat deine LAN Karte wohl ein Problem, was?!
Ohne Mac kann auch DHCP nicht gescheit funktionieren.
04.07.2010 11:39 Gonzo28 is offline Send an Email to Gonzo28 Search for Posts by Gonzo28 Add Gonzo28 to your Buddy List Add Gonzo28 to your Contact List
kodo kodo is a male
V.I.P.


images/avatars/avatar-18184.jpg

Registration Date: 04.08.2004
Posts: 11,413
Which box: DM500; DM600; D-Box; andere
External Storage: keine
Which accessories: Atemio Nemesis, Atemio 6100, Coolstream Neo² Cable, Octagon SF-1028P@TitanNit
Which Image: Gemini; PLi; Sonstige
Welcher Bildschirm: Toshiba 50L4363D
Origin: Ruhrpott

Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

Ne, das mit den FF's hab ich hier schon häufiger gelesen, hat vielleicht mit dem Frontend zu tun.

__________________
Gruß, Stephan
-------------------------------------------------------------------------


04.07.2010 11:40 kodo is offline Search for Posts by kodo Add kodo to your Buddy List
² Bad °° Boy ² ² Bad °° Boy ² is a male
Dreamer


images/avatars/avatar-1296.gif

Registration Date: 03.12.2004
Posts: 1,399
Which box: DM500HD; DM900; DM8000
External Storage: USB-Stick; SD-Card; HDD; NAS
Which accessories: WHS Belinea o. Center, QNAP TS-453A, Teufel THX Sondbar, Harmony One
Which Image: OE 2.5; OE 2.0; DMM original
Welcher Bildschirm: LG 55"=8k, 37" FullHD=500HD
Origin: NRW

Thread Starter Thread Started by ² Bad °° Boy ²
Reply to this Post Post Reply with Quote Edit/Delete Posts Report Post to a Moderator       Go to the top of this page

naja aber das
code:
1:
INIT: cannot execute "/usr/bin/enigma2.sh"

is imo denk ich das gröste problem, was könnt ihr mir den dazu sagen?

__________________

04.07.2010 11:58 ² Bad °° Boy ² is offline Send an Email to ² Bad °° Boy ² Search for Posts by ² Bad °° Boy ² Add ² Bad °° Boy ² to your Buddy List Add ² Bad °° Boy ² to your Contact List AIM Screen Name of ² Bad °° Boy ²: Skype: Baddy81 View the MSN Profile for ² Bad °° Boy ²
Pages (2): « previous 1 [2] Tree Structure | Board Structure
Jump to:
Post New Thread Post Reply
i-have-a-dreambox.com | Dreambox - Support » ...::: Archiv - The Gemini Project (GP3, GP2 und GP) :::... » ...::: The Gemini Project 2 :::... » The Gemini Project DM8000 » komische probleme, bitte lesen

Privacy policy | Team | Suchen | Hilfe


Powered by Burning Board 2.3.6 © 2001-2003 WoltLab GbR