Code
[4294669.301000] ata1: SATA max UDMA/133 cmd 0xB0510000 ctl 0xB0510020 bmdma 0xB0510030 irq 42
[4294669.310000] scsi0 : sata_svw
[4294676.657000] ata1: port is slow to respond, please be patient (Status 0xd0)
[4294699.665000] ata1: port failed to respond (30 secs, Status 0xd0)
[4294699.671000] ata1: device not ready (errno=-16), try softreset
[4294699.681000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl F0000)
[4294699.687000] ATA: start status D0 spinup wait!
[4294699.687000] ATA: status D0 spinup wait completed after 420 msecs!
[4294700.364000] ata1.00: ATA-11, max UDMA/100, 17545576638933300855 sectors: LBA48 NCQ (depth 0/15)
[4294700.373000] ata1.00: ata1: dev 0 multi count 6
[4294700.378000] ata1.00: applying bridge limits
[4294700.653000] Data bus error, epc == 80209f78, ra == 8020928c
[4294700.653000] Oops[#1]:
Alles anzeigen
Mit Platte kommt ein Data bus Error und die Box bootet in eine Kernel Panic
Code
[4294700.861000] Kernel panic - not syncing: Fatal exception in interrupt
[4294700.868000] <0>Rebooting in 180 seconds..
Bootet die Box ohne Platte normal? Entweder ist die Platte oder die Box defekt. Ich würde die Box mal mit einer anderen Platte am eSATA Anschluß booten oder eine intern verbauen.