DaVinci Image 7020

  • hat jemand Image DaVinci für Dreamb.. 7020 ???


    bisher gibt es bei 7000..!! :face_with_rolling_eyes:

    Dreambox 7000S,40G
    DaVinci4
    Dreambox 7020S, 80G
    Gemini Mods 2.00

  • Für die 7020er Box gibt es kaum Images, vermutlich weil die Image-Macher alle immer noch NUR 7000er Boxen haben.


    Aber das wichtigste Image gibt es für alle Dream-Modelle. :grinning_squinting_face:

  • hallo..ferrismc,,,leider läuft nur bei 7000 !!! :confused_face: :confused_face:


    also bei 7020 braucht nur solche datei..z.b. "***.nfi" :confused_face: :confused_face:


    nicht ....."***.img"


    danke :face_with_rolling_eyes: :face_with_rolling_eyes:

    Dreambox 7000S,40G
    DaVinci4
    Dreambox 7020S, 80G
    Gemini Mods 2.00

  • jepp, habe mit miniroot auf der 7020
    aktuelles CVS im Flash
    USB Hub
    WLAN USB Stick1
    gemini auf Stick1
    DaVinci auf Stick2


    DaVinci läuft einwandfrei auf der 7020
    Bei mir allerdings nur von Zeit zu Zeit.


    Mit dieser Config kommt man an die "Goodies" im DaVinci heran.
    In das gemini kopiert funktionieren die Binaries ja auch ...


    In das Flash der 7020 würde ich ein 7000 Image aber auch nicht packen :winking_face:


    Bye
    Klaus

  • Wenn runeutrino 7020 im flash ist , kann mann alle 7000 images mit der endunk img und wfz auf den stick mit FlashWiz.5.0 instalieren.

  • Zitat

    Original von bobek
    Wenn runeutrino 7020 im flash ist , kann mann alle 7000 images mit der endunk img und wfz auf den stick mit FlashWiz.5.0 instalieren.



    Yuppp, danke nochmal für deinen Tipp an anderer Stelle. Das funtzt 1a. So würde ich es auch anderen empfehlen. Viel leichter zu bewerkstelligen als mit MiniRoot...

    <b>MfG Ali</b>
    <p />
    <select OnChange="window.open(this.options[this.selectedIndex].value, 'New')">
    <option value="/wbb2">Aus meinem Labor:</option>
    <option value="/wbb2/thread.php?threadid=127480">ARD Mediathek</option>
    <option value="/wbb2/thread.php?threadid=105590">CCcam Info</option>
    <option value="/wbb2/thread.php?threadid=99943">CS-Manager</option>
    <option value="/wbb2/thread.php?threadid=117478">DVD Backup</option>
    <option value="/wbb2/thread.php?threadid=90957">Extended Service Info</option>
    <option value="/wbb2/thread.php?threadid=92153">Mosaic</option>
    <option value="/wbb2/thread.php?threadid=114726">Movie Jukebox</option>
    <option value="/wbb2/thread.php?threadid=127314">Movielist Preview</option>
    <option value="/wbb2/thread.php?threadid=107501">ORF.at</option>
    <option value="/wbb2/thread.php?threadid=99478">Permanent Clock</option>
    <option value="/wbb2/thread.php?threadid=111496">Podcast</option>
    <option value="/wbb2/thread.php?threadid=125382">Porn Center</option>
    <option value="/wbb2/thread.php?threadid=89009">RS Downloader</option>
    <option value="/wbb2/thread.php?threadid=118188">Seekbar</option>
    <option value="/wbb2/thread.php?threadid=92584">Zap-History Browser</option>
    <option value="/wbb2/thread.php?threadid=127065">Zap Statistic</option>
    <option value="/wbb2/thread.php?threadid=125298">ZDF Mediathek</option>
    </select>

  • habe die neue 7020 bekommen und möchte mein da vinci image vn meiner 7000er draufspielen. gibt es ein prog um das image umzuwandeln das aus *img *nfi wird???? was braucht man dazu und gibt es evtl noch andere möglichkeiten?? thx im voraus

  • Davinci -Version 5:
    http://www.satnews.tv



    Readme
    _____________________
    The Satnews Dreambox Team


    109.1d_SDT_DaVinci5.img



    Image for FLASH / USB / HDD / NFS


    - Kernel and Modules 2.6.9 - Release 1.09_1d
    - Enigma 1.09 - CVS 11/08/2005, modified by SDT
    - WebIf 4.6.3 Expert
    - Tuxtxt v. 1.90


    This Image, if installed in Flash, will upgrade your FrontProcessor to Vers. 1.06




    ==============================================================================================




    NEWS DaVinci 5:
    =================


    - Zapping Lite Skin
    You can share two skins at the same time.
    While zapping channels, a second skin will be displayed on OSD, generally a light skin, but maybe a second complete skin reorganized on the screen: lot of possibilities for skins developers.
    Zapping Lite Skin can be disabled on SDT boss panel -> OSD setup.


    - SDT Advanced Infos
    Very powerful unique window, full of advanced infos, customized for each emu.
    You can also define and run up to 9 scripts, with output on screen, stored into /var/SDT/scripts/customX.sh, where X is a number from 1 to 9


    - Movie recording directory
    Choose where to store your recordings, you can choose between three default positions and two user definable positions.
    A test of the choosen device will be performed, displaying the amount of free space (GB) and free time (estimated, HH:MM) available for recording.
    A comfortable shortcut to Enigma "Mounts" window makes easy to mount/umount the connected devices with just a few remote control clicks, then to select them as recording devices.


    - Enhanced Smart_init:
    More than settings, you can install DaVinci addons also with new smart_init procedure!
    Check below on this document for instructions.


    - SDT custom scripts:
    Up to 9 scripts can be defined, and launched from Advanced Infos Window.
    The output will be displayed on TV screen..


    - Shortcuts
    BLUE button:
    1 click: SDT boss panel
    2 single clicks: "Utilities" Window
    3 single clicks: "Enigma Extra Setup" Window


    YELLOW button:
    double-click: "SDT Advanced Infos" Window


    GREEN button:
    double-click: "Timer List" Window!


    - Plugins Window
    Now is taller, showing 13 plugins without scrolling, instead of 8 (enigma standard).


    - Save All Settings
    Save image settings for smart_init procedure.
    It is on SDT boss panel -> Enigma Extra Setup -> Save all settings.
    Very useful for upgrading to a new DaVinci image, or reinstalling.
    You'll find all current settings made for the current image automatically reloaded on the new one.


    - SAMBA
    Enable/Disable Samba is now available on Enigma Expert Setup ("enable file sharing").
    You must reboot dreambox to activate changes.


    - LCD logo
    Nice LCD boot logo (by Hiii2)


    - OSD
    Provider shown on OSD (near Channel name)
    MULTI AUDIO icon on OSD
    TELETEXT icon on OSD
    Frequency, Polarisation, SymbolRate, FEC of transponder on OSD


    - SKIN
    Default skin is now VisivaBox Extreme 2 skin,
    modified for DaVinci image (by DDAAXX - VisivaGroup)




    ==============================================================================================




    SDT unique features:


    - SDT Advanced Infos, Very powerful and unique emu's advanced info center.
    - Time Controlled Parental Control - define your protection-activation daily timetable
    - EPG Wizard - download only the channels of your choice total automatically
    - Flash erase via Remote Control
    - FlashWizard Remote: FW program inside the box!
    - Smart_Init: install flash or multiboot image with auto-setup!
    - Usb stick also available from /usb (just like /hdd)
    - The most complete OSD available at the moment.
    - SDT shell boot window


    Other Features:

    - SDT Boss Panel (blue key), upgradable from internet
    - Movie recording directory, choose recording device.
    - Display SNR - AGC- BER on OSD
    - Display Provider's name on OSD
    - Display Multi-audio and Teletext on OSD
    - Display stream infos on OSD
    - Display channel encryption(s) on OSD
    - Display current Emu on OSD
    - Internet download of addons
    - Manual install of addons from /tmp
    - Addons manager, installer and uninstaller
    - Place addons on USB or HDD
    - Check /var place, and available free space
    - SWAP file advanced setup from Boss Panel
    - OSD timeout configurable from SDT menu
    - HDD configuration (sleep and acoustic) from menu
    - Skin Visivabox Extreme 2 - 4:3 and 16:9 versions
    - Emuboss is now totally software configurable
    - SAMBA is included
    - Reiserfs is optional and dowlodable from Addons-Download
    - CIFS is optional and dowlodable from Addons-Download
    - Complete busybox (nc, netstat, renice, cut, and more...)
    - Up to 9 scripts user-definable, output on TV screen.
    - Auto-recognition of install place, flash or multiboot
    - Automount disc/part1 usb stick
    - Autoclean core files on hdd
    - Added "restart enigma" (hot restart) on shutdown menu
    - Tetris game included
    - Recover Movies (in menu Enigma Extra Setup)
    - SDT latest news download and display



    - This firmware contains no emus and no keys -


    All Other Addons Available From Direct Download!


    ------------------------------------------------


    QUICK HOW-TO:


    - FlashWizard Remote
    A FlashWizard program inside the box, with full "SmartSettings copy" available. :)
    You can install/remove images without windows program:
    FTP one (or more) images into /usb or /hdd, then choose the install device, and
    SmartSettings enable/disable.... done! :)
    Useful option for all linux/macintosh friends, who like to use FlashWizard
    outside Windows o.s.



    - Smart_Init
    You can install this image (even if on flash), and have it
    full configured with your custom settings even at first boot.
    How to do this:


    1) Create a directory /usb/SDT/smart_init ( or /hdd/SDT/smart_init )
    2) Then create 2 directories inside smart_init: "settings" and "addons"
    3) Copy into "settings" directory your favourite settings (likra, pet, comax, etc.etc.)
    (make sure to copy all the settings files, included satellites.xml)
    Put just files there, do not put folders.
    OR:
    Use the menu "Save ALL settings" located in SDT Boss Panel -> Enigma Extra Setup
    4) into the "addons" directory, you can put DaVinci's addons files (*.tar.gz): the image will install them automatically!
    Warning:
    if you are installing the image on flash, DO NOT put too much addons into!!
    Free space on Flash is very little!!
    5) Done.

    DaVinci image will boot up and auto-configure itself with all your
    settings: favourites, channel lists, language, network, video, etc.etc.
    plus addons (if any).
    On flash-erase, or new install, the image will check if smart_init folder
    exists, and re-initialize itself automatically with your favourite set-up.
    Very useful option for all rotor/multi-lnb users.
    No more loooong setup from scratch at every install.


    ------------------------------------------------


    Satnews Dreambox Team


  • Kann mir Jemand Sagen ob USB Hub auch was Bringt?
    bzw. ob das funzt?


    Was ich ereichen wil ist volgendes
    an DB7020s WLan + USB-Stick anshlissen und das über ein USB hub
    hat da einer erfahrung damit?
    muss ich auf ergend was achten?
    Besondere Hardware oder belibige? ...


    Danke voraus 4 Info

    DM 7025ss



    Flash Drive 1 GB.
    HDD 500 GB.
    The Gemini2 Project 3.70
    -------------------
    Rotor + 110 cm. Parabol
    42°w --->42°E

    Einmal editiert, zuletzt von GIADOM ()

  • ein USB Hub läuft bei mir an der 7020 fehlerfrei mit 2 Sticks.
    Sollte mit einem entsprechend aktuellen Image klappen.


    Was bei miniroot etwas "tricky" war, ist die Duchnumerierung der USB devices. Evt. muss man mit telnet in die Box, und die miniroot devices Nummerierung ändern...
    Wenn's bei dir soweit ist, schick mir einfach 'ne PM.


    MfG
    Klaus

  • hi,


    Zitat

    Original von BRUUT-DREAM
    AaaH , COOLBOY das komt mich sehr bekannt vohr


    Gruss BRUUT-DREAM. :grinning_squinting_face:


    hehe.. yes :)


    i´m surfing currently on Satlords - welcom on IhaD :grinning_squinting_face:

    CooLbOy


    K€In€r $†iRb† @L$ JuNgFr@u D@$ $cHicK$@L Fi*K† J€d€n