dm900 usb dvb-t dont work?

how should anybody help you?

at least post info about your image, config,....

Zitat

Originally posted by Bschaar
how should anybody help you?

at least post info about your image, config,....

no info - no help

you don't post which USB tuner

you don't post which image (7020 and 900)

you just write incomplete sentences

...

so nobody can help you

Evolve Mars DVB-T USB dongl
DM800se -OK

DM900 Problem - Please increase it with coherent_pool= kernel parameter!

root@dm900: dmesg|less
usb 3-1: new high-speed USB device number 2 using ehci-brcm
input: ITE Technologies, Inc. USB Deivce as /devices/rdb.4/f0470300.ehci_v2/usb3/3-1/3-1:1.1/0003:048D:9006.0001/input/input5
hid-generic 0003:048D:9006.0001: input,hidraw0: USB HID v1.01 Keyboard [ITE Technologies, Inc. USB Deivce] on usb-f0470300.ehci_v2-1/input1

it913x: Chip Version=02 Chip Type=9135
it913x: Remote HID mode NOT SUPPORTEDit913x: Dual mode=0 Tuner Type=0
it913x: Unknown tuner ID applying default 0x60<6>[168551.727595]
usb 3-1: dvb_usb_v2: found a 'ITE 9135(9006) Generic' in cold state

usb 3-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw'
it913x: FRM Starting Firmware Download
it913x: FRM Firmware Download Completed - Resetting Deviceit913x Chip Version=02 Chip Type=9135
it913x: Firmware Version 52887808<6>[168552.039109] usb 3-1: dvb_usb_v2: found a 'ITE 9135(9006) Generic' in warm state
usb 3-1: dvb_usb_v2: will pass the complete MPEG2 transport stre am to the software demuxer
ERROR: 256 KiB atomic DMA coherent pool is too small!
Please increase it with coherent_pool= kernel parameter!
dvb_usb_it913x: probe of 3-1:1.0 failed with error -12
usbcore: registered new interface driver dvb_usb_it913x

You are in the wrong board for usb tuner support, you've to contact DMM.

Look at the post from dhwz. We are not DMM, we are a free board.

Ihn trifft gleich der Blitzzzz wenn noch mehr plizzzz........ kommen-